Shot Blast Dust Collection and Explosion Protection Upgrade Case Study

Ductwork Reconfiguration and NFPA-Compliant Explosion Isolation for a Shot Blasting Dust Collection System

Craig Equipment reconfigured ductwork and installed an NFPA-compliant VigiFlap isolation valve on a shot blast dust collector in Louisville, Kentucky. The upgrade replaced an incomplete isolation valve with an 18-inch Boss Products VigiFlap and added two 36″ × 44″ explosion vents, magnetic breaking signal sensors, an adjustable dust-level sensor and a CP05 control panel. Duct-drop tie-ins were re-angled and the existing ductwork cleaned. Blue Grass Metal Works handled field installation; the existing collector was retained.
Case Study Type
Dust Collection System Optimization / Explosion Protection
Industry
Automotive Equipment Manufacturing
Location
Louisville, Kentucky
Primary Application / Product
Shot Blasting / Boss Products Explosion Protection Equipment

The Client

The customer is a Louisville, Kentucky-based automotive equipment manufacturer serving a variety of automotive service and repair applications.

As part of its manufacturing operations, the customer uses a shot blasting process to clean and prepare metal components. Effective dust collection captures and conveys the dust and particulate generated during blasting, supporting a cleaner and safer manufacturing environment.

The Challenge

The customer was experiencing both performance and safety concerns with the existing dust collection system. Several duct-drop tie-ins entered the main duct at unfavorable angles, creating a less efficient path for conveying dust and particulate away from the process.

The system’s existing explosion-isolation valve presented a more serious concern. The valve was missing key internal components necessary for proper operation, including a functional flap or drop-door assembly. In that condition it could not perform the isolation function it was installed to provide.

Because the valve was incomplete, the isolation arrangement did not comply with applicable NFPA requirements for explosion prevention and isolation systems. Correcting that deficiency, and doing so without taking the existing collection system out of service, was the customer’s priority.

The Solution

Craig Equipment developed a solution that addressed both the dust-conveyance and explosion-protection concerns within the existing system.

Before system upgrade, this was the existing explosion isolation arrangement

Rather than replacing the entire dust collection system, the existing ductwork was reconfigured to improve the geometry of the duct-drop tie-ins and provide a more favorable path for dust and particulate to enter the main collection duct. Existing ductwork was also cleaned to remove accumulated material and help restore system performance.

The noncompliant isolation valve was replaced with an 18-inch Boss Products VigiFlap explosion isolation flap valve. The NFPA-compliant VigiFlap provides passive explosion isolation, helping prevent flame and pressure from propagating through connected ductwork in the event of a deflagration.

The upgraded explosion-protection system also incorporated two 36″ × 44″ explosion vents, magnetic breaking signal sensors, an adjustable dust-level sensor and a Boss Products CP05 control panel. Together, these components provide explosion relief, isolation, system monitoring and shutdown capability as part of the facility’s overall dust collection safety system.

The Equipment

The system upgrade incorporated the following explosion-protection and monitoring equipment supplied by Boss Products:

  • 1 — Boss Products 18″ VigiFlap Explosion Isolation Flap Valve — NFPA-compliant passive isolation valve with locking mechanism, inspection/access door, grounding straps and inductive shutdown sensor.
  • 1 — Boss Products Adjustable Dust-Level Sensor — capacitive sensor for organic dust applications, monitoring dust accumulation as part of the explosion-protection system.
  • 1 — Boss Products CP05 1-Zone Control Panel — three monitored inputs, system status indication and an output for system shutdown and monitoring; accepts a secondary clean-air isolation valve.
  • 2 — Boss Products 36″ × 44″ VD Explosion Vents — domed explosion-relief panels providing a controlled pressure-relief point during a deflagration, protecting the associated equipment from damaging overpressure.
  • 2 — Boss Products Magnetic Breaking Signal Sensors — sensors that detect activation of the explosion vents and provide an electrical signal to the system’s monitoring and shutdown controls.

Beyond the Boss Products equipment, the project scope covered reconfiguration of the existing duct-drop tie-ins and cleaning of the existing ductwork. The dust collector itself was retained.

Blue Grass Metal Works assisted Craig Equipment with the field installation and ductwork modifications at the customer’s Louisville facility.

Results

Replacing the incomplete and noncompliant isolation valve with the Boss Products VigiFlap, along with the associated controls, monitoring devices and explosion-protection components, corrected the deficiencies in the existing explosion-protection system and brought NFPA-compliant explosion isolation to the shot blast dust collection system.

These improvements were accomplished by upgrading and reconfiguring the customer’s existing dust collection infrastructure rather than replacing the entire system. The facility addressed both performance and safety concerns while avoiding the cost and production disruption of a complete system replacement.

Installation Images

After upgrade: the dust collection system with reconfigured ductwork and new explosion isolation equipment.
Our team integrated the new explosion-isolation equipment into the facilities existing ductwork
BOSS Product VigiFlap non-return valve installed as part of the upgrade to prevent propagation by a downstream explosion

Whether a facility is looking to improve the performance of an existing dust collection system or needs a complete system designed for a new application, Craig Equipment Company can help. Craig Equipment works with industrial facilities throughout Kentucky and Southern Indiana to evaluate existing systems, identify opportunities for improvement, and provide solutions ranging from ductwork modifications and equipment upgrades to explosion protection.

Craig Equipment can also assist with equipment selection, complete new dust collection systems and turnkey installation.